• Frequency range: 4 kHz - 400 MHz
• Input connector: Typ N female
• Inner / Outer diameter: 40 mm / 120 mm
• Width: 40 mm
• Max. core temperature: 90 °C
• Turns ratio: 1:1
• Input power rating until core temperature is 90 °C: 90 min @ 70 W (48.45 dBm), 45 min @ 100 W (50 dBm)
• Primary inductance: 5.1 μH @ 100 kHz
• Ambient temperature: 0 - 40 °C
• Delivery with calibration jig
• Integrated temperature sensor
• Low insertion loss

The CDN BCI-P1 has an integrated temperature sensor and low insertion loss. The current clamp is supplied with a calibration set (JIG) and calibration certificate. The JIG is used to measure the insertion loss of the current clamp and complies with the ISO 11452-4 and IEC 61000-4-6 standards.

To cover the ISO 11452-4 and MIL STD-461G (CS114), a CDN BCI-P1_MT-1 transformer is also required. We will be happy to advise you on the configuration of your devices.

Scope of Delivery:

• 1 x CDN BCI-P1
• 1 x CDN BCI-P1_MT-1
• 1 x calibration jig
• 1 x calibration certificate
• 1 x SMB cable (temperature sensor cable)
• Power supply unit (P4018) with mains cable
• 1 x USB cable (USB A to USB B)
• 1 x cable RG 223, 50 cm, N-f – N-f
• User manual