• 30 kV Air- and Contact discharge
• Discharge impedance 150 pF / 330 Ohm
• Contact control for contact discharge
• Counter mode with and without automatic polarity change
• With test tips for contact (SESD 3021) and air discharge (SESD 3020)
• 2 test methods are to be used: Air discharge and Contact discharge
• Predefined standard test levels: Higher test levels can be set far beyond the standard limits
• Displaying of the real discharge voltage at air mode
• Programmable automatic test runs
• Large display with easy to read digits
• Battery and mains operation

The ESD Simulator SESD 230 is suitable for performing EMC tests on systems in accordance with the standard IEC / EN 61000-4-2 (ESD test). Higher test levels can be set far beyond the standard limits. Depending on the test object and test setup, two test methods are to be used: Air discharge and Contact discharge. In air discharge the pulse is triggered by approaching the SESD 230 towards the DUT. With the method of contact discharge the test tip of the generator is placed directly on the test object.

Scope of Delivery:

• ESD simulator SESD 230
• Battery charger incl. cable
• Standard discharge electrodes for air discharge (SESD 3020)
• Standard discharge electrodes for contact discharge (SESD 3021)
• Weight (with content): approx. 3.4 kg
• Ground cable (SESD 231)
• Manual